- 4樓 Re: 艾爾莎顯卡: SolidWorks2006的新武器ELSA FireGL V3100(圖)
- 請解讀使用艾爾莎 ATI FireGL V7200藍屏后的提示:
A problem has been detected and windows has shut down to prevent damage to your computer
If this the fist time you’ve seen this stop error screen, restart your computer. If this screen appers again, follow these steps: you
Check to be sure you have adequate disk spare if a drive is identified in the stop message, disable the driver of check with the manufacturer for driver updates, Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove disable components, restart your computer, press F8 to select Advanced startup options, and then select safe mode.
(進BIOS,改設置:
caching or shadowing Enable改為Disable.存盤退出!)
Technical information:
STOP:0x0000008E(0xc000005, 0xBFA48550,0xB&!00b0,0x0000000)
Acti2cqq.dll-address BFA48550 base act BFA270000,Datestamp 43e95563.
眼淚都躺干了
- 作者:lsl 2008-6-8 12:04:00
- 3樓 Re: 艾爾莎顯卡: SolidWorks2006的新武器ELSA FireGL V3100(圖)
- 我的配置1、CPU 酷睿2/6420 1460
主板 華碩P5B 1080
硬盤 WD 320G 730
內存 金士頓1G *4 1280
顯卡 艾爾莎V7200 8650
顯示器 三星226BW 2150
光驅 SONY G170A 350
鼠標 羅技套件 150
電源 AH680A 760
機箱 VA3000BNSB 680
合計:17290 含稅:18500
2、80G移動硬盤:600元(含稅)
3、4G優盤:450元(含稅)
請解讀使用艾爾莎 ATI FireGL V7200藍屏后的提示:
A problem has been detected and windows has shut down to prevent damage to your computer
If this the fist time you’ve seen this stop error screen, restart your computer. If this screen appers again, follow these steps: you
Check to be sure you have adequate disk spare if a drive is identified in the stop message, disable the driver of check with the manufacturer for driver updates, Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove disable components, restart your computer, press F8 to select Advanced startup options, and then select safe mode.
(進BIOS,改設置:
caching or shadowing Enable改為Disable.存盤退出!)
Technical information:
STOP:0x0000008E(0xc000005, 0xBFA48550,0xB&!00b0,0x0000000)
Acti2cqq.dll-address BFA48550 base act BFA270000,Datestamp 43e95563.
- 作者:lsl 2008-6-8 12:03:00
- 2樓 Re: 艾爾莎顯卡: SolidWorks2006的新武器ELSA FireGL V3100(圖)
- 請解讀使用艾爾莎 ATI FireGL V7200藍屏后的提示:
A problem has been detected and windows has shut down to prevent damage to your computer
If this the fist time you’ve seen this stop error screen, restart your computer. If this screen appers again, follow these steps: you
Check to be sure you have adequate disk spare if a drive is identified in the stop message, disable the driver of check with the manufacturer for driver updates, Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove disable components, restart your computer, press F8 to select Advanced startup options, and then select safe mode.
(進BIOS,改設置:
caching or shadowing Enable改為Disable.存盤退出!)
Technical information:
STOP:0x0000008E(0xc000005, 0xBFA48550,0xB&!00b0,0x0000000)
Acti2cqq.dll-address BFA48550 base act BFA270000,Datestamp 43e95563.
- 作者:lsl 2008-6-8 12:00:00
首頁 | 前頁 | 后頁 | 尾頁 | 分頁 1/1 [1] |
-
·尊重網上道德,遵守中華人民共和國的各項有關法律法規
·承擔一切因您的行為而直接或間接導致的民事或刑事法律責任
·本站管理人員有權保留或刪除其管轄留言中的任意內容
·本站有權在網站內轉載或引用您的評論
·參與本評論即表明您已經閱讀并接受上述條款